Intelli PAK

Why Do I Need an Oil-Water Separator?

The process of compressing air typically produces a substantial amount of condensate that contains air compressor lubricant carryover. Without an oil-water separator in your compressed air system, this condensate/lubricant mixture will go down the drain and quite possibly find its way into the surrounding groundwater. The Intelli PAK System has been engineered to provide the most effective and user-friendly oil-water separator on the market.

Features

Alumino silicate substrate media is formulated to attract the contaminants and repel water molecules
The internal bonding process virtually eliminates any possibility of the used media being able to contaminate ground water
All Units will handle any lubricant including silicone
Five different capacities: 250 cfm, 400 cfm, 750 cfm, 1000 cfm, and 1500 cfm
Sleek cabinet design that matches our compressors
Proprietary encryption design on the replacement cartridges

Benefits

Our cabinet design does not require the need for expensive pumps, sensors or filters
The proprietary media bed does such an effective job that no pre-filtration is required
Rugged internal piping assures proper operations over the life of the unit
Instead of opening the unit to replace spent media (a very messy process), simply dispose of the unit once it is full
This "fill and replace" method will ensure that both you and your compressor room do not end up covered in air compressor lubricant
Easy disposal most likely through local waste management service
Designed to last up to 6 months when the correlating cfm is chosen on the Intelli PAK models

Downloads

Brochure

Performance

Data Sheet

{{recommendedRegLangFull}}