Click to enlarge
R-Series Lubricated Reciprocating Air Compressor
Two Stage, Splash Lubricated (2-30 HP) Reciprocating Air Compressor
Champion R-Series Compressors have a time-tested, proven design. Rugged standard features, a wide selection of configurations, and quality available options make the R-Series compressors the solution to your application. Delivering high performance, long life and tremendous value. Champion compressors are the proven choice!
Specifications and Features
- 2 - 30 HP
- Up to 175 PSIG
- 4.2 - 202 ACFM at 175 PSIG on electric driven units
- Mounted Dryer/AirStation option with XCNC dryer available on certain select simplex models
- Gas and diesel engine drive models available
- Tank or Base Mounted, Simplex & Duplex Models
- Two Stage Splash-Lubricated Pumps
- 3 year standard warranty with the option for a 6 year extended warranty
- Factory filled with ChampLub lubricant
Share
Standard Features
- Load-less starting (via centrifugal unloader) for lower energy costs and less wear on drive motor
- ASME inter-stage pressure relief valve for protection
- ODP NEMA 1760 RPM electric motor
- 10 Micron industrial grade intake filter
- ASME coded receiver
- 0-300 PSIG air pressure gauge on tank
- Available voltages
- Single phase-115/208-230
- Three phase-208/230/460/575
- Multiple tank sizes and variations
- Electric or engine driven
- NEMA 4 full-voltage starter upgrade
- ODP HE/TEFC/TEFC HE motor upgrades
- Control panel upgrades
- Air-cooled with or without moisture separator
- Low oil-level monitor (NEMA 1 or 4)
- Dual control
- Vibration isolators
- Synthetic lubricant
- High temperature switch (NEMA 1 or 4)
- Available switches (NEMA 1 or 4)
- Test/Off/Auto
- Automatic tank drain - Electric
- Multi-Finned Cylinders for Cooler Operating Temperatures
- Integral Cylinder/Head Design for Trouble-Free Operation
- Balanced Pistons
- Piston Rings Provide Excellent Oil Control and High Efficiency
- Lightweight, Two-Piece Connecting Rods
- Pressure Relief Valves
- Large Diameter Finned Intercoolers
- Optimized Cooling Fan/Flywheel
- Reliable High-Flow Disc Valves
- Tapered Roller Main Bearings
- Balanced Crankshaft
- Large Capacity Cast-Iron Crankcase
- Centrifugal Unloader for Minimized Starting Power & Completely Load-Less Starting
Features
Standard Features
- Load-less starting (via centrifugal unloader) for lower energy costs and less wear on drive motor
- ASME inter-stage pressure relief valve for protection
- ODP NEMA 1760 RPM electric motor
- 10 Micron industrial grade intake filter
- ASME coded receiver
- 0-300 PSIG air pressure gauge on tank
- Available voltages
- Single phase-115/208-230
- Three phase-208/230/460/575
- Multiple tank sizes and variations
- Electric or engine driven
- NEMA 4 full-voltage starter upgrade
- ODP HE/TEFC/TEFC HE motor upgrades
- Control panel upgrades
- Air-cooled with or without moisture separator
- Low oil-level monitor (NEMA 1 or 4)
- Dual control
- Vibration isolators
- Synthetic lubricant
- High temperature switch (NEMA 1 or 4)
- Available switches (NEMA 1 or 4)
- Test/Off/Auto
- Automatic tank drain - Electric
Benefits
- Multi-Finned Cylinders for Cooler Operating Temperatures
- Integral Cylinder/Head Design for Trouble-Free Operation
- Balanced Pistons
- Piston Rings Provide Excellent Oil Control and High Efficiency
- Lightweight, Two-Piece Connecting Rods
- Pressure Relief Valves
- Large Diameter Finned Intercoolers
- Optimized Cooling Fan/Flywheel
- Reliable High-Flow Disc Valves
- Tapered Roller Main Bearings
- Balanced Crankshaft
- Large Capacity Cast-Iron Crankcase
- Centrifugal Unloader for Minimized Starting Power & Completely Load-Less Starting